Fish Creek Spinner Zonker Spinnerbaits Fish Creek Spinners Armadillo Trout Spinners 1/8oz Propellor spinners Fish Creek Spinners large fishing spinners Fish Creek Spinners Metal Armadillos

Wednesday, January 29, 2014

Spinner of the week 1-29-14 - 1/8oz June Bug Transformer


These Spinners rock my boat!

They introduce a new blade, changed hook attachment, and new mainstream a new hook dressing -  the June Bug Blade; slip R bend hook attachment, and zonker strip banded trebles.



June bug blades are unique and different. They don't use a clevis, similar to an inline blade, but also have a secondary brace that provides two points of rotation on the wire. Two wear points on the wire, generate extra noise and vibration.

June Bug blades spin well at ultra-low speeds and give off a very consistent strobe-like flash as they rotate.

Pretty cool blade. They've been used on trolling cowbells for many years. I decided to try them on spinners, and now have 3 size variations available, plus a walleye version.

I first saw the slip R bend on a Blue Fox. This attachement fits will with zonker banded trebles, salmon lures, and any spinner that is fished in a variety of waters where regulations about barbed vs barbless are dealt with. The Transformer uses a big tail bead behind the blade. This bead has a large center hole, twice the diameter of the spinner wire.

Open slip R bend


Hook in R bend
Slip the end back into the Tail bead - Done

The extra space allows the spinners wire to be bent back (R bend) and slid back into the bead, leaving a loop for the hook. You can open and close the loop by sliding the bead forward or backward on the wire.

The nice thing with the June Bug blade, is that you can also spread the brace to take up slack on the wire. Just not too much in either direction , else it will bind or weaken the brass.

When the bead is slide forward, the loop opens to form the R and you can change out hooks, replace zonker colors.

Zonker banded trebles are another evolutionary break-through.

I started out using bucktails on the Tranformers and other spinners for dressed hook options.

Tying bucktail on treble hooks is kind of tedius. There's three sharp barbs to contend with doing your wraps. Get it about done and start half hitching and snap the thread breaks...You know the feeling.

We had been making zonker spinnerbaits for some time, tying the strips and wraping shoulders, made a nice looking spinnerbait.

Fish Creek Closed Loop 2+oz Zonker Spinnerbait
Other Spinnerbaits used the Silicon Starflash Skirts

Fish Creek Spinners Closed Loop Spinnerbait

Just a matter of time... 

A few years earlier, browsing through a Netcraft catalog, I found and bought Skirt Banding Tool. Never used it as I found a great wholesaler of banded skirts. 

Skirt banding tool


Looking at purchased banded Skirts,  skirt bands, and Zonker Strips, I dug out the Banding tool and got creative.

The result.....Zonker banded dressed hooks - now available as hook options. Fun choices!

Fish Creek Spinners Zonker Banded Treble hooks

There you have it, the spinner for this week and future fish pictures is the June Bug Transformer. Eighteen color variations and more dressed treble choices in the Other Category. 

Oh, the transformer part of the name references how it's look can change with a new banded treble or different hook type - barbed treble, Single, dressed barbed treble, dressed barbless treble, dressed Single, etc.



Thursday, January 23, 2014

Spinner of the Week - 1/5oz Metal Armadillo

This spinner model has been around awhile and holds a place of esteem in my book of memories and folder of fish photo's returned by happy anglers around the world.

Fish Creek Spinners 1/5oz Metal Armadillo 
The body beads are nickel that's been powder coat painted with transparent powder. This model also has a few fluorescents - Orange, Green, and Yellow.

There's just something that feels right about the 1/5oz weight in your hand - substantial, and fun to cast in larger waters.

That very blue spinner above, caught my son Will a toothy Brown Trout in the Colorado River and left him with some respect for the lure and the species.
Colorado River Brown Trout cuaght on Blue Metal Armadillo

Here's a crappie caught in Bemigi,  Minnesota - another caught on the blue and gold

Nice Sunfish - Bemidji, Minnesota Blue and Gold Metal Armadillo

Here's a sea trout caught on a red one by Lars, in Denmark

Denmark Sea Trout caught on Red Metal Armadillo


That said, the model is this weeks spinner of week. Here's another picture of one of my favorite colors.

Fish Creek Spinners 1/5oz Green Metal Armadillo

To see more, visit the web store at Fish Creek Spinners Metal Armadillo


Check out the New Revolver widgit!

You should see a mini-earth slowly revolving over to the left. If not, refresh the page.

The widgit loads each launch, but if you've cached NOTL blog in a prior visit, you may not initially see it.

While browsing blogger stats this morning, I saw visit stats from a trout blog in Poland -
 (Tom and Matt's Trout Travels) and decided to go take a look and immediately noticed my location spinning on this cool little javascript app.

It was tagged with a source, so I went and took a closer look. I really like it. The blogger stats don't show city, just country. Although not a pinpoint location, it's a far better look at location sensitive traffic.

Oh what the heck, I'll put the snippet in the post. This is the seasonal version, so it's showing some snow! Little red dots are prior visitors, and the expanding white circles should be where it thinks you're at, I guess interpreting the visits IP address.

A few more Revolver observations worth mention, Mouse down on the globe, you can stop or speed up rotation with horizontal drag. Vertical drag can give you a view from the north pole or change the angle to another perspective. Then here are all the little icons in lower left to tinker with. As admin, I can go to look at history countries with drill in to individual states, or regions.

I'm a happy camper and don't see a downside to it's use so far!

Tuesday, January 14, 2014

Spinner of the Week 1/14/14 - Ultralite 1/30oz Fire Fly

Off to a fresh start for the new year with the best intentions and taking another shot at bringing back the spinner of the week posts.

That said, here's my vote for first Spinner of the Week choice on the third week of 2014... and since I'm the only one voting, there's nobody to blame but me.

This weeks choice is the ultralite 1/30oz Fire Fly - this one in Crystal Green.



The Fire Fly spinner is a sweet little unit, barely tipping the scale off zero. It's not for everyone, but has a sweet spot niche for those anglers fishing around and finding the time to wander off the main flow into those hidden and ignored tributaries that mostly get stepped across while fishing the larger flow waters.

Some of my 'best' discoveries ever - beaver ponds holding back runoff and containing flow, hold schools of brook trout and hungry cutthroat. To find them, you need to follow the small flows, sometimes for hours across false peaks and marshy wetlands. The fire fly fishes the waters before you get to the ponds.

Surrounded and sometimes covered by thick brush and undergrowth, or lost in marhy wet lands, but still enough flow to cut under banks and hide hungry colorful little fish.

Drop and drift fishing. Stealth fishing into pools the size of a toddlers swimming pool. Ultra-fun discoveries where the 1/8oz and 1/5oz spinners are to heavy and hard to control.

Anyway, you know where I'm talking about. Here's a few more colors to look at.

Fish Creek Spinners 1/30oz Blue and Silver Fire Fly

Fish Creek Spinners 1/30oz Brown and Gold Fire Fly

Fish Creek Spinners 1/30oz Silver and Silver Fire Fly

Fish Creek Spinners Red Orange and Gold Fire Fly

Eighteen variations to choose from and hook choice options including single hooks and barbless trebles

See the full set here 1/30oz Fire Flys

There's a few early season deals listed on home page News link popup, provided you have FCS popups enabled.

Sunday, September 1, 2013

Fish Bone Combs

I know a woman, she'll make a freight train moan.

I know a woman, she'll make a freight train moan.

She combs her hair, with Catfish bones.

Ray Wylie Hubbard - Weevils.

Whew, it's been awhile since the last blog post. This season I took a break from pushing wholesale spinners and let the online business have it's course.

After seeing Ray Wylie Hubbard on Letterman earlier in the year, I've been listening to some of his CD's. Remembering his 'Redneck Mother' tune on a Jerry Jeff Walker tape, I realized I hadn't heard much of his other work.

Time and Inspiration, is the mother of invention.

Got a Fitbit and lost 35 pounds - walking, jogging and tracking steps.

Next, I decided I needed to develop my musical talent learning to play guitar. I now have 2 resonators, one acoustic 4 string bass and a 6 string electric dobro (plus a Fender lap slide, but who's counting).

Here's the Dobro in it's stand



Now I've got some new Noise on the Line - amp line that is!

Noise on the Line Resonator

Anyways, while listening to Hubbard lyrics, I centered in on the catfish bones verse and decided to give my guitar avoidance and 'weight loss and gain it back again', a break to make some catfish bone combs.

First you need a woman to make them for.

Then you need a Catfish (plus a Red Snapper for a bone quality check and more servings)

Fish bone combs in waiting

Fillet the fish and make lunch -

Then it gets complicated.

Fleshing the carcass down to bone has options.

If you do some google searches on cleaning fish bones, you learn about flesh eating beetles, leaving fish on anthills, and how oily and fragile fish skeleton's can be if you try to boil them.

Being out of flesh eating beetles, I opted to let them sun dry a few days, attracting flies and wasps and then spent an hour or so scissoring off the fish jerky between the backbone vertebrae.

Next, I did a soak in Acetone solvent to separate fatty oils and loosen up connecting tissue. Acetone worked pretty good and got inside the backbone to loosen up nerve strings and tissue in the spinal column, that beforehand, had been like iron re-enforcing rods in concrete.

After the Acetone bath and some dry scrapping, I decided to 'simmer' them in luke warm water for a few hours. Good move.

This re-hydrated and softened up the remaining jerky, and the heat separated the oil, in preparation for a more thorough scraping.

 I used a sharp nosed tweezers to scrape, pick, and investigate the skeletal bone tunnels and channels. Searching for and finding a lot of hidden tissue treasure. With time, the bones were starting to get clean!

Fish bones in Acetone bath
What 'dem bones' needed now, was some Colorado sunshine. So I left ol' Catfish's bones to bleach, in the Range of the Buffalo - for a few hours anyways. August Sun is amazing whitener - smile more!

With the bone preparation about complete, I had to figure out how to cast handles.

I wanted clear resin, so I found Encapso K and Epoxacast on Smooth-on. Well initially I found a Water Clear product, but following that rabbit trail, it turned into a rat hole that required about $300 of new vacuum chambers and pumps to get the bubbles out, plus platinum core mold resin. Youtube has oodles of info on casting and mold making, btw.

Vacuum pumps and chambers, maybe down the road, but not today.

So clear handles to seat half the bone, leaving one side outside as the comb teeth.

I collected a bunch of smooth agates and egg shaped rock, a couple summers ago, on the shore of Lake Superior, up close to Copper Harbor, Michigan.

Loved those rocks, so they became the first models to cast in the tin core Mold Max T 15 I also bought from Smooth-on.

Mold box candidates?


Since it was clear resin, I also dug up some multi-colored beach glass chips to spice up the cured bone profile.

Here's a look at the V1 cured molds.

Cured Molds for casting Fish bone combs


Finally, after cure, some fish bone swag and other primitive art, plus plenty of lessons learned for Round 2!


Fish Bone combs - Hair Picks - and Sea Glass spiced Rocks


Got some sweet Petri coaster designs out of the project too.

Green Beach Glass 60mm petri dish whatchamacallit

Aspen mosaic coaster in 100mm glass Petri Dish

Cape Brenton Beach Glass Desk thingee in 60mm Petri dish






Sunday, April 21, 2013

New Walleye Crawler rigs

Here's a few pictures of some new smaller sized rigs. These are weighing in at 1/16oz.

What's different?

I used smaller components to reduce their weight; smaller diameter stainless wire, smaller prism eyes, High visibility (but lighter) plastic beads, smaller propellers or smaller June bug blades.

Another option is that the swivel attached Mustad Slow death twirler hook is on 11 inches of 8# mono. Other hook choices are available in the web store.

Back to the pictures. Two styles in this batch. One with the June Bug blade and the other with double propellers.

June Bug blade version

Double small propeller version

Sixteen color and blade variations with options on hook types.

11 inch slow death crawler rigs waiting for attachment

R bends waiting for swivels!

Plastic UV sensitive body beads in black light 

Six pack headed to an assortment offer

June bugs with faceted glass tail beads

June bug tail spinners

Double propeller models in a few fluorescent colors

Styrofoam leader wrap to wind and control mono for clam shell packaging
Here's the first batch with medium size components in the web store. There's still a smaller set of components to bring them into the 1/25oz range.

Got them being tested in South Dakota, will update the post after some pictures come back in!


Tuesday, March 26, 2013

In case you haven't noticed ---

Paint has 'Pain' in it.


So, I decided to break out the big components and make some Muskie spinners.

As luck would have it, the painted body beads were in short supply. Warning!!! - Paint cycle alert.

What's a paint cycle alert about?

Here's a clue.. check the first sentence.

Beyond the one liner, well, it gets complicated quick.

First, I need to muster up the inclination to plan and tackle the project... nothings ever easy, is it?

Good things, may come to those that wait, but only what's left..

I guess there's no time like the present to get the show on the road.

Like I tell the G-kids. If you want to finish your chores, you need to stop whining, and start one.

Ok, whew, the inclination hurdle is in the rear view...

The Process


 Now thinking about the project, I need to clean off more space on the work bench.

Have I shown you my dream Spinner Shack layout? It's organized differently, much bigger... shared with squirrels, not cats....

Lots of windows facing the River. My Ridgetop Spinner Shack Squirrel Sanctuary.

Thank-you Jesse Colin Young

Mossy rock formations surrounded by pine needles and rotting leaves.

Shafts of sunlight filled with dust from the disturbed forest floor.

Disturbed as I stalk toward the massive brown trout.

He lays below the fanned out roots of a cedar dead fall, waiting and watching for his prey.

As I try, desperately, to avoid this painting chore blog post.

Painting sure trips the stall wire, almost like writing about it does..

Try that again

Anyways, once again, I need to clean off some space on the workbench.

Painting drags out a mess of support tools - like

Jars of bulk powder paint colors, component beads and bodies, a sweet Milwaukee heat gun, hundreds of paint wires, A few wooden cooling stations, bake racks, baking wires, A bake prep rack, The oven, A post-bake drying rack, and finally finished product storage.

OK, so much for space on the work bench, better plan a lean-to on the Spinner Shack, LOL.



Now a few tests to get back in the paint zone - adjust heat gun temp - Check, windage heat times based on bead sizes - Check, clean up the round nose pliers - Check, fire some wires to torch off any old paint - Check.. basically get organized and try to remember any lessons learned, noting any pulsing body parts or twitches resulting from specific memories.

Let the adventure begin! Now we're having fun!!!

String a batch of beads on to the paint wires.


Brass beads for solid colors. Nickel for transparent colors. Trusty round nose pliers. A rubber pad to keep things from rolling around. This was a scrap for the picture. The real one's bigger, LOL.

Background has a tube of Paint wires with the bearing bead, a tube of ashed over dip wires that were torched to clean them, a tube of used dip wires with paint still on them.

Pick your power color and spoon some from the storage jar to a dipping jar.

Per bead Ops


Position a bead in the middle of the wire and support it with the round nose pliers below it.


Reduction nozzle on adjustable temp Milwaukee Heat Gun. Bulk Powder Paint. Powder Dip can.

Hot Drop grip on the Paint wire as it's heated. I've tried lots of techniques. This position leaves the base and top of the paint wire cooler. That's important for the next step when it's going into the dip can. Imagine counting up to eight. One thousand one, ...., one thousand eight. OK, it's hot enough.

Too hot the power smokes, burns and bubbles. Not hot enough, the powder doesn't melt to the metal. Note** err on the side of not hot enough.


This one's not hot.. This was a staged re-creation using one hand and the cell phone. Note to self, find some hand lotion...

Another tried and true discovery.

Dipping is a two hand job.

What do you do with a hot metal part covered in melting plastic strung on the world's smallest branding iron?

Something quick. Melted plastic drys hard. especially over wrapped stainless wire.

I found that if I grab the part (again with the round nose), only this time above the painted part I can swing over to the wooden cooling station, then flip it over to seat the wire into a drill hole.

Eureka, the hot part slowly sinks, sliding down the wire to rest on the wooden rack. This action not only keeps the part from cementing to the wire as it cools, but reams out most of the paint that got into the components hole during dipping, leaving it on the wire.  SweeeeT!


Notice the paint trailing down the dipping wires. Those beads started out on top of the wire when they were seated.

Imagine about a hundred of these colorful little asteroids lined up on the wooden cooling board.

Time to get Baked!

OK, now what...Time to get them ready for baking. If you don't bake them, the plastic is brittle and chips off easily.

Don't believe me, drop one on the floor. Did I just hear some curse words?

I've found I need to move the dipped part to a clean wire before baking.

If you try to bake it on the dipping wire, either hanging it immediately without cooling or flipping it back against the wires loop, all that paint that slid out of the hole, is back inside it, waiting to bake and harden into a bond akin to lava rock, stronger then say - the love of one drunk for another?


I have a Black and Decker variable temperature toaster oven w/timer. I'm happy with it. I try to do small on-demand batches. This keeps the painted inventory limited, but maximizes flexibility on raw materials. To each his own.

I built a wooden stand for the oven rack, then added those black office clips, end to end on each of the oven racks wires. The clips grab, separate and suspend each painted part during it's time in the oven.

I found, that putting that small round bead on the baking wire first, before the part, helps to avoid a lot of baked part wrestling, pinched fingers, broken wires, chipped parts and other varieties of strain related injury and foul language. These behaviors are known to occur during the 'Baked  Parts Removal Festival' (BPRF).

In practice, excess paint melts and drains off each part while it's suspended vertically in the oven.

The small bearing provides a narrows between itself and the part, like an hour glass. A pivot point for snapping loosing the part.

Without it, the melt off paint coats the wire and turns to concrete. I've thought about putting a split ring hook on it and calling it done, but only in my dreams!

Stay tuned for the Parts Removal Festival post!

Anyways, with this technique I can usually just use the round nose pliers to snap between the part and small bead to loosen the part and slide it off the wire.

I've tried stacking several parts on the backing wire too.

In my opinion, it seems that removing the parts is less frustration, if they're not stacked.

If there's a lot of melt off the part, it's not that easy. Time for the wire cutter jaws, but again, having the narrows, albeit coated separation seems to help.

The sooner after the bake cycle you get to removing them, the better -  and as always - practice makes perfect.

I think certain paint colors are more problematic then others. It's likely the way the mix is made. Some seem to coat much thicker then others.

Transparent is fun to work with. The solids seem to be the ones that coat thick, coat the round nose, bake and run, you name it, but if you want the fluorescent colors, there you have it.

Fast forward past all the remaining toil and trouble (removing each part after baking) to a blissful box of painted parts.





Another picture of the painted parts lined up on Muskie spinners.

Fish Creek Spinners in progress Muskie Spinners 2 oz+ Single Bites
Stay tuned, these are large (2+ ounce) single blade Double Skirted Armadillo's - #9 .40 gauge Fluted blades. Sixteen colors. - Silicon Star flash Skirts.


Thursday, March 7, 2013

Fish Creek Spinners Web store

I'm trying to simplify the Fish Creek Spinners web store navigation, removing long scroll lists on the Category pages and replacing that with tables of choices within the category.

From these you drill into the detail pages where you can select and add products to the shopping cart, etc. prior to check out.

Here's a compressed version of the technique - levered into the blogs page format size limits.

There's other goodies like popup fish pictures and flash slideshows, but this is just a sample of the 'improved' drilldown and cleanup.

For the real thing, and a sample of the lower levels of the drill down, Visit the store!

Fish Creek Spinners Web Store Navigation

  • Use the Category links on the left to view and scroll groups of spinners
  • Click on a small pictures or links to go to the spinners detail page.
  • Mouse over the small pictures to expand it's picture to read descriptive information about it.
  • Scroll down the page to see Model Specifications and other shopping help.
  • There's also a Search Store box up on the right side header.
Ultralite Spinners
Medium Spinners
Large Spinners
Spinnerbaits
Fish Creek Spinners Stream Trout fishing spinners
Fish Creek Spinners Salmon fishing spinners
Fish Creek Spinners Large fishing spinners
Fish Creek Spinners Spinnerbaits
Ice Fishing Tackle
Walleye Fishing Tackle
June Bug Spinners
Spinner Assortments
Fish Creek Spinners Large fishing spinners
Fish Creek Spinners Spinnerbaits
Fish Creek June Bug blade Spinners
Fish Creek June Bug blade Spinners


Tuesday, March 5, 2013

Skirted Crankshafts - Need any?

Blame it on the Colorado sun, but a new 1 ounce spinner is in the chute and rearing to get in the water!

This one has a unique S clevis water chopper between the metal body and the starflash skirt. The Super Willow blade contacts and rotates this thing during rotation. Noise on the Line.

I actually bought these unusual S shaped clevises last year after seeing them at Worth's Inc. Then opt'd not to use them after a few tests.

I didn't have much luck balancing them with the spinners and blades I hoped to use, so they didn't fulfill their part of the bargain, and went into storage.

The nice thing about having lots of stuff, is every now and then an idea sprouts and needs some stuff - to give it traction. That was the case with the errant clevis.

The S clevis turned into a spinner crankshaft of sorts, lol.

Here's a few pictures.

1oz Perch Crankshaft
1oz Silver Streak Crankshaft

1oz John Deere crankshaft - this ones a B! 

More in the web store! Skirted Crankshafts Be the first to put one in your tackle box!